So we all use the T mark at some stage, and I am able to say I look down that Hole quite often
Anyhow think about it,unsure , even if you can get your eye in the correct position you are lining it up with Pointer that is part of the casting of the sidecover, so it is hardly exact.
I found the actual TDC with this Gauge, it is not perfect but nor are you or me
Then I took a picture of the T mark , the Mark not the "T".
Next I am going to insert a threaded tool into that Hole to ensure it is on that Correct angle and bash it with a Hammer!
That will give me a Punch mark which I will be able to use in the future
I would have completed this tonight but had a slip up with a Soft Hammer and compressed my Oil Cooler, Friggen 443 Barrel doesent want to come off so I resorted to Bashing it, that didnt work. this is the Deck height. And TDC okay not perfect.
and this the T mark at the same time, not perfect either!
Anyhow think about it,unsure , even if you can get your eye in the correct position you are lining it up with Pointer that is part of the casting of the sidecover, so it is hardly exact.
I found the actual TDC with this Gauge, it is not perfect but nor are you or me
Then I took a picture of the T mark , the Mark not the "T".
Next I am going to insert a threaded tool into that Hole to ensure it is on that Correct angle and bash it with a Hammer!
That will give me a Punch mark which I will be able to use in the future
I would have completed this tonight but had a slip up with a Soft Hammer and compressed my Oil Cooler, Friggen 443 Barrel doesent want to come off so I resorted to Bashing it, that didnt work. this is the Deck height. And TDC okay not perfect.
and this the T mark at the same time, not perfect either!
Last edited: